Skip to main content
PRODUCTS | NECTOR
NECTOR 200

CONTROL PANEL FOR THE COMPLETE MANAGEMENT OF COLD ROOMS WITH INTEGRATED CONNECTIVITY

CONTROL PANEL FOR THE COMPLETE MANAGEMENT OF COLD ROOMS WITH INTEGRATED CONNECTIVITY
CONTROL PANEL FOR THE COMPLETE MANAGEMENT OF COLD ROOMS WITH INTEGRATED CONNECTIVITY
    Control panel for the complete management of cold rooms with single-phase compressor up to 2HP with Datalogger function and integrated connectivity. Designed to integrate safety, protection, control and ease of installation into a single solution.
    Brochure download
    Download Instruction Manual
    CONTROL PANEL FOR THE COMPLETE MANAGEMENT OF COLD ROOMS WITH INTEGRATED CONNECTIVITY
    CONTROL PANEL FOR THE COMPLETE MANAGEMENT OF COLD ROOMS WITH INTEGRATED CONNECTIVITY
      Applications
      • Complete management of static or ventilated single-phase refrigeration systems up to 2HP, with off cycle or electric defrost, with direct compressor stop or pump-down in combination with the Datalogger / remote control function.
      • Management of the single-phase evaporating unit only with freon solenoid valve consent and remote condensing unit consent in combination with the Datalogger / remote control function.
      Main characteristics
      • Direct management of compressor, defrost heaters, evaporator fans and cold room light.
      • Wi-Fi, Ethernet and Bluetooth (BLE) connectivity.
      • Bluetooth functions with MyPego app: complete remote control of the instrument, configuration of connectivity settings, display of daily history and system status.
      • Cloud functions with MyPego app (function can be activated by subscription): real-time system control; daily history; real-time alarm messaging notification.
      • Integrated local webserver.
      • Datalogger function with up to 2 years’ history.
      • Humidification / dehumidification function with dedicated 4-20mA humidity probe.
      • Condenser or evaporator fan speed management with 0-10V analogue output and dedicated pressure probe (probe not included).
      • Off cycle, electric, hot gas and thermostat-controlled defrosting, also with real-time clock.
      • Direct management of the solenoid valve for hot gas defrosting.
      • Double evaporator management with dual end-ofdefrost probe.
      • Emergency operation (in case of faulty ambient probe).
      • Pump-down operation.
      • Configurable cold/hot/neutral zone mode.
      • Energy saving (day / night setpoint management, smart defrosts).
      • Integrated USB port for datalogger / parameter download and software update.
      • Backup battery for data logging in the absence of the main power supply (optional).
      • 7 configurable digital inputs.
      • 2 configurable digital outputs.
      • RS485 for connection to the TeleNET or ModBUS supervision network.
      Properties
      Dimension
      NECTOR 200
      300 x 200 x 100 mm
      Front protection rating
      NECTOR 200
      IP 65
      Insulation type
      NECTOR 200
      Class II
      Working temperature
      NECTOR 200
      0 +50 °C
      Relative ambient humidity
      NECTOR 200
      30% - 90% RH without condensate
      Power frequency
      NECTOR 200
      50 / 60 Hz
      Battery
      NECTOR 200
      12 V, NI-MH 1300 mAh, autonomy 40h (** optional )
      General electrical protection (depending on the model)
      NECTOR 200
      Bipolar differential magnetothermal switch 16A, C-Char, ID=300mA
      Connectable sensor types
      NECTOR 200
      Bipolar differential magnetothermal switch 16A, C-Char, ID=300mA
      Resolution
      NECTOR 200
      Temperature: 0,1 °C
      Humidity/Pressure : 1 RH% / 0,1 Bar
      Read range
      NECTOR 200
      Temperature: -45 +99 °C
      Humidity/Pressure: 0T 100 RH% / 0,1 Bar
      Configurable digital inputs
      NECTOR 200
      7
      Normative referee
      NECTOR 200
      EN 12830
      Adéquation
      NECTOR 200
      S (Conservation)
      Type of climate environment
      NECTOR 200
      A
      Accuracy class
      NECTOR 200
      1
      Analogue outputs
      NECTOR 200
      0 – 10 V
      RS485 Serial
      NECTOR 200
      Modbus-RTU / TeleNet
      Bluetooth
      NECTOR 200
      Blue low energy
      Wifi
      NECTOR 200
      802.11 B/G/N (2.4 GHZ) UP TO 150 Mbps
      Ethernet
      NECTOR 200
      10/100 Mbps
      Dimension
      NECTOR 200
      NECTOR 200
      Connection Scheme
      NECTOR 200
      NECTOR 200
      Technical Characteristics
      Ambient Condition
      Electrical Characteristics
      Inputs
      Designation
      Outputs
      Connectivity
      Dimensions and Diagram
      Manuals
      Info
      IT
      EN
      FR
      ES
      DE
      Technical Manuals
      IT
      EN
      FR
      ES
      DE
      Modbus Protocol
      -
      EN
      -
      -
      -
      Web services (http)
      IT
      -
      -
      -
      -
      Download